Tag: power units
If you ask Doug Kitlar what he’s most excited about with the Sakaw Terrace project, he’ll have a lot of answers. With Sakaw Terrace being GEF Seniors Housing’s most ambitious building, there was a lot of risk and innovation put into the plans. But one innovation in particular comes up more often than most and is one of the more exciting aspects of a building that Kitlar has worked with in his more than 12 years as GEF Seniors Housing’s Director of Facility Management.
“The whole Sakaw Terrace project is being built on what’s called an Integrated Project Delivery, or an IPD,” says Kitlar. “That means that [GEF Seniors Housing], our architects [at Rockliff Pierzchajlo Kroman Architects Ltd.], and our building contractor [at Chandos Construction Ltd.] all have some sort of skin in the game. For our partners, it’s their profits that are at risk being based on the design and construction efficiencies. It was through this collaborative approach that the Combined Heat and Power unit became integral to the design.”
The idea of a Combined Heat and Power unit (CHP) was brought up as a way to efficiently and cost effectively provide electricity, heat, and hot domestic water to the more than 150 suites and commercial kitchen. On the surface, its efficiencies are obvious but it’s hard to see where the excitement is rooted. As Kitlar explains, once you break down the numbers involved, the CHP becomes quite impressive.
When compared to similar buildings GEF Seniors Housing currently owns and operates, the CHP unit will not only save the foundation significant money over time, it also helps to reduce a significant amount of carbon emissions. Utilizing a CHP for Sakaw Terrace will save GEF Seniors Housing approximately $80,000 a year and will reduce carbon emissions by 530 tonnes annually. To put into comparison, the United States Environmental Protection Agency measures the average passenger vehicle as releasing about 4.7 tons of carbon annually. That’s close to 113 Ford Focuses worth of emissions reduced every year. For Kitlar, the cost savings is nice but the environmental impact is where he’s especially proud.
“It’s important to own that environmental stewardship,” says Kitlar. “Every effort to reduce carbon emissions builds up to something bigger. Anywhere I can make an extra effort for environmental responsibility, I want to take it.”
The design of the CHP involves generating electricity on site using natural gas, which also produces heat. The heat is then captured from the CHP and directed to the pre-heat for the fresh air intakes, the building’s heating boiler systems, and the domestic hot water systems for the suites. Because both electricity and heat are created from a single source of fuel, it reduces the net amount of emissions.
Carbon emissions are further reduced because the CHP eliminates what’s known as line loss. Traditional electrical systems require the power to travel through long lines to reach where power needs to be generated, which can result in losing up to 40 per cent of electrical efficiencies. By having all the power and heat at a single source, any efficiencies that would have been lost because of line loss are regained, requiring less total natural gas to generate the same amount of heat and electricity.
“I really do think that everything we decided to include in the Sakaw Terrace project is going to set a new standard for what affordable seniors housing can look like in Edmonton,” says Kitlar. “We’re trying a few new things and I know the reward is going to be an amazing building that many people will be happy to call home.”